French Press Coffee Maker
If you’re wondering how to make coffee in a coffee maker with a traditional drip filter, follow these steps:
- measure and grind your coffee beans (about 2 tablespoons per 6 ounces of water);
- fill the reservoir with cold, filtered water and pour it into the chamber;
- place the filter in the chamber and add your ground coffee on top;
- gently shake to level out the grounds;
- set the timer or program your desired brew time, if applicable, and press start/brew.
AeroPress Coffee Maker
Follow these steps for a perfect cup of coffee:
- fill the chamber with hot, filtered water just off the boil;
- insert the filter into the cap and rinse with hot water to remove any paper taste from the filter;
- measure and grind your coffee beans (about 2 tablespoons per 6 ounces of water) and add them to the chamber on top of the hot water;
- gently stir for 10 seconds to evenly distribute grounds;
- place the plunger onto the chamber, making sure it is firmly sealed, then slowly press down until all the liquid has been extracted into your mug or carafe below.
Cold Brew Coffee Maker
To answer the question of “how to make coffee in a coffee maker if you want a cold brew”, try using these steps:
- measure and grind your coffee beans (about 1/3 cup per 4 cups of water);
- place the ground coffee in the filter basket and lower it into the pitcher or carafe;
- slowly pour cold, filtered water over the grounds, making sure they are completely saturated;
- place in the refrigerator and let steep for at least 12 hours or overnight;
- remove the filter basket with grounds and enjoy your cold brew on its own or with milk and sweetener of your choice.
Drip Coffee Maker
Follow these steps to brew drip coffee:
- start with fresh, cold water. Fill your coffee maker’s water reservoir with cold filtered water; avoid using distilled water, as it can impart off-flavors to your coffee;
- next, measure out your coffee grounds; for every six ounces of water, you’ll need one tablespoon of coffee grounds, so, if you’re using a 12-cup coffee maker, you’ll need two cups of grounds;
- Place the filter into the filter holder and wet it with some cold water from the reservoir; this will help prevent the filter from becoming clogged later on;
- add the measured coffee grounds to the filter and give it a gentle shake to level out the grounds;
- place the filter holder back into the coffee maker and close the lid;
- turn on the coffee maker and wait for it to finish brewing, depending on your model of coffee maker, this could take anywhere from five to 15 minutes;
- once brewing is complete, remove the pot from the coffee maker and pour yourself a cup of delicious drip coffee;
- after you’ve poured yourself a cup, discard the used filter and grounds.
Troubleshooting Tips to How to Make Coffee in a Coffee Maker
When trying to learn how to make coffee in a coffee maker, it’s important to be aware of common problems that can arise and how to troubleshoot them.
First, check the heating element to make sure it’s working properly. If it’s not heating up the water sufficiently, that could be why your coffee isn’t coming out hot enough. Second, take a look at the coffee pot. Make sure it’s clean and free of any debris that could be clogging up the filter basket. Third, check the grinder. If your coffee beans aren’t being ground properly, that could also be affecting the quality of your coffee.
- Brewing Coffee – How to Make Coffee Without a Coffee Maker
- Which Brewing Method Takes the Longest? Coffee Brewing Methods
- How Much Coffee Per Cup to Use? Coffee to Water Ratio & Brewing Methods
- Black Eye Coffee – What Is it? LoHi and Starbucks Coffee Explained
- How to Clean a Moka Pot? An Easy Way to Properly Clean an Espresso Maker